 |
| Quantity: | |
|---|---|
The Lightweight 30W 40W Portable CO2 Marker redefines mobility with a 7kg total weight (30W model) and ergonomic rubberized handle—designed for single-hand operation during extended use. Powered by a 14.8V/10Ah rechargeable lithium battery (supports 2-hour fast charging), it delivers consistent CO2 laser output (10.6μm wavelength) for on-site marking of leather (e.g., furniture labels), wood (e.g., pallet IDs), and plastics (e.g., construction pipe markings). The 40W model offers 20% higher energy density than the 30W version, enabling 1mm deep marking on thick wood (e.g., oak planks) vs. 0.6mm for the 30W.
Yongli Laser Source
Original EZCAD Control Software
BJJCZ Control Card
Lens
Rotation Axis for Circular Marking
Other Accessories
Portable laser marking equipment sales are growing at 9.2% CAGR, fueled by field service needs in automotive repair (on-site VIN code restoration), heritage conservation (wooden artifact labeling), and construction (pipe/wire marking). A 2024 survey of small businesses found 67% cite "on-demand marking capability" as their top purchase driver—replacing traditional manual stamping, which is 5x slower and prone to human error. The construction sector alone accounts for 32% of portable CO2 marker demand, as it eliminates the need to transport large materials to fixed marking stations.
True Portability: 1.5kg handheld laser module (separate from 5.5kg battery pack) reduces operator fatigue; shoulder strap included for hands-free transport at job sites.
Long Battery Life: 8-hour continuous operation on a single charge (30W model)—enough to mark 500 wooden pallets or 800 meters of plastic pipe per charge.
Rugged Construction: IP54 rating (dust-tight, splash-proof) resists dust in construction sites and splashes in automotive workshops; casing made of impact-resistant ABS plastic.
Fast Deployment: Ready to use within 2 minutes of power-up—no complex calibration required; pre-loaded with common marking templates (barcodes, serial numbers).
Complies with IEC 60825-1 safety standards (Class IV) and CE electromagnetic compatibility (EMC) regulations. The 30W model achieves 0.2mm character height (readable with a 10x magnifier) and 0.6mm marking depth on pine wood; the 40W reaches 1mm depth on oak and 0.8mm on PVC. Under environmental testing, it operates normally in -5℃ (winter construction sites) to 45℃ (summer workshops) with no performance degradation.
Battery capacity upgrades (14.8V/15Ah) for 12-hour continuous operation in remote areas.
Custom marking templates pre-installed for specific industries: construction (pipe size labels), automotive (VIN code formats), heritage (museum artifact IDs).
Protective carrying case with foam inserts (custom-cut to fit machine components) for transport between job sites.
Optional solar charging panel (18V/100W) for off-grid use in remote construction projects.
The Lightweight 30W 40W Portable CO2 Marker redefines mobility with a 7kg total weight (30W model) and ergonomic rubberized handle—designed for single-hand operation during extended use. Powered by a 14.8V/10Ah rechargeable lithium battery (supports 2-hour fast charging), it delivers consistent CO2 laser output (10.6μm wavelength) for on-site marking of leather (e.g., furniture labels), wood (e.g., pallet IDs), and plastics (e.g., construction pipe markings). The 40W model offers 20% higher energy density than the 30W version, enabling 1mm deep marking on thick wood (e.g., oak planks) vs. 0.6mm for the 30W.
Yongli Laser Source
Original EZCAD Control Software
BJJCZ Control Card
Lens
Rotation Axis for Circular Marking
Other Accessories
Portable laser marking equipment sales are growing at 9.2% CAGR, fueled by field service needs in automotive repair (on-site VIN code restoration), heritage conservation (wooden artifact labeling), and construction (pipe/wire marking). A 2024 survey of small businesses found 67% cite "on-demand marking capability" as their top purchase driver—replacing traditional manual stamping, which is 5x slower and prone to human error. The construction sector alone accounts for 32% of portable CO2 marker demand, as it eliminates the need to transport large materials to fixed marking stations.
True Portability: 1.5kg handheld laser module (separate from 5.5kg battery pack) reduces operator fatigue; shoulder strap included for hands-free transport at job sites.
Long Battery Life: 8-hour continuous operation on a single charge (30W model)—enough to mark 500 wooden pallets or 800 meters of plastic pipe per charge.
Rugged Construction: IP54 rating (dust-tight, splash-proof) resists dust in construction sites and splashes in automotive workshops; casing made of impact-resistant ABS plastic.
Fast Deployment: Ready to use within 2 minutes of power-up—no complex calibration required; pre-loaded with common marking templates (barcodes, serial numbers).
Complies with IEC 60825-1 safety standards (Class IV) and CE electromagnetic compatibility (EMC) regulations. The 30W model achieves 0.2mm character height (readable with a 10x magnifier) and 0.6mm marking depth on pine wood; the 40W reaches 1mm depth on oak and 0.8mm on PVC. Under environmental testing, it operates normally in -5℃ (winter construction sites) to 45℃ (summer workshops) with no performance degradation.
Battery capacity upgrades (14.8V/15Ah) for 12-hour continuous operation in remote areas.
Custom marking templates pre-installed for specific industries: construction (pipe size labels), automotive (VIN code formats), heritage (museum artifact IDs).
Protective carrying case with foam inserts (custom-cut to fit machine components) for transport between job sites.
Optional solar charging panel (18V/100W) for off-grid use in remote construction projects.
English
